Options
Colour
  • Transparent
  • Carbon Look
  • Black
  • Silver
  • White
  • Transparent Red
  • Red
  • Orange
  • Yellow
  • Green
  • Transparent Blue
  • Blue
  • Transparent Purple
  • Pink
Fitting One

Unless stated otherwise, all our fittings are compatible with both convex and concave fittings. If you need to orientate the fittings you can do this yourself: you simply grip the end of the hose and rotate the fitting in its seat to the angle you need.

Fitting One Angle

If you have a banjo or swivel fitting, we can bend it to the angle you need. If you have a fixed fitting, we can only supply these straight.

Fitting Two

Unless stated otherwise, all our fittings are compatible with both convex and concave fittings. If you need to orientate the fittings you can do this yourself: you simply grip the end of the hose and rotate the fitting in its seat to the angle you need.

Fitting Two Angle

If you have a banjo or swivel fitting, we can bend it to the angle you need. If you have a fixed fitting, we can only supply these straight.

Support One

The supports are not fixed on the hose, so you can mount them anywhere you want.

  • None
  • Single Bolt Locator
  • Double Bolt Locator
  • Circlip Small Nut
  • Circlip Large Nut
  • Rubber Grommet
  • Bobbin Grommet
Support Two

The supports are not fixed on the hose, so you can mount them anywhere you want.

  • None
  • Single Bolt Locator
  • Double Bolt Locator
  • Circlip Small Nut
  • Circlip Large Nut
  • Rubber Grommet
  • Bobbin Grommet
Heatshrink

If you want it, we can put a heatshrink around the ferrules.

  • None
  • Black
Length

If you aren't sure on the length, add 1-2cm to the total. It's better to have the hose slightly too long than too short.

Custom Brake Hose

$70.00 exc. Tax: $65.42
LENGTH -
Specifications
Description
Specifications
Certification

Description

You can now create your own custom brake hoses, professionally hand-made to your exact specifications.

We expertly assemble each custom hose using non rusting stainless steel fittings, crimped directly to high performance stainless steel braided hose which is then protected with a wipe clean PVC cover available in a variety of colours.

Each custom hose is quality inspected before dispatch and they are suitable for use in all brake and clutch systems.

All our custom brake and clutch hoses include a lifetime warranty and are legal to fit to any vehicle worldwide.

Specifications

Hose Inner Material PTFE
Hose Outer Material 303/304 Stainless Steel & Protective PVC Cover
Fittings Material 303/304 Stainless Steel
Temperature Range -70°C to 260°C (-158°F to 500°F)
Internal Diameter 3.5mm (0.138")
Outside Diameter 7.5mm (0.295")
Maximum Working Pressure 290 Bar (4206 PSI)
Burst Pressure 870 Bar (12618 PSI)
Minimum Bend Radius 38mm (1.496")

Certification

ABE KBA Germany, Austria, Switzerland View certificate
TÜV Germany View certificate
Dekra Germany View certificate
DOT United States View certificate
FMVSS-106 Worldwide View certificate
SAE Worldwide View certificate
ADR Australia Visit website
NHTSA Worldwide Visit website
Israel MoT Israel Visit website
NZTA New Zealand Visit website